Save Preloader image

0%

Site Logotype

RACE Software Plans – Pricing

HomeRACE Software Plans – Pricing

Standard and Advanced levels are now available to sign up below. Users can easily upgrade from Standard to Advanced level.

To purchase and enrol on one of our Educational Courses, please buy directly from the course page.

We have developed custom solutions for the automotive and motorsport industries (and also for other industries) from OEMs to Formula 1 including EV Companies and the Gaming/Sims/Esports industry using our lean, scalable cloud-based MBS/MBD architecture.

All our plans come for a LIMITED TIME with UNLIMITED simulations. In the near future there will be different plans with different amount of simulations that can be perfomed in a month based on the chosen package and it will be applicable only to new users. A Fair Usage Policy will be introduced at that stage if required.

Become a RACE Software user NOW to benefit of UNLIMITED simulations on ALL Software packages.

All RACE Software plans come with preloaded data and simulations for each suspension template.

Start using RACE Software NOW with a complimentary 7-Days FREE Trial.

All our products can also be acquired using digital currencies. If you prefer this method, click here.

 

RACE Software Subscription Plans


FEATURES

RUN ON ANY DEVICE FROM A WEB BROWSER

NO SOFTWARE INSTALLATION

NO MULTIBODY SIMULATION EXPERIENCE REQUIRED

NO POST PROCESSING REQUIRED

STATE OF THE ART CLOUD ARHITECTURE

CLOUD BASED RESULTS AND REPORT STORAGE

DEDICATED SECURED MEMBER AND DATA PORTAL

PRELOADED DATA AND SIMULATIONS ALL TEMPLATES

LOAD HARDPOINTS FROM ANY CAD PACKAGE VIA CSV

INTERACTIVE REAL-TIME 3D GRAPHICS

7-DAYS FREE TRIAL

UNLIMTED SIMULATIONS LIMITED-TIME OFFER

USE CASES

RAPID SUSPENSION DESIGN ITERATION

SUSPENSION CONCEPT EVALUATION

SUSPENSION CONCEPT REFINEMENT

USER DEFINED USE CASES

TEMPLATES  ↓ CLICK ON EACH FOR INFO ↓

DOUBLE WISHBONE SUSPENSION

MACPHERSON STRUT SUSPENSION

FIVE LINK SUSPENSION

CONTROL BLADE SUSPENSION

PUSH/PULL ROD DOUBLE WISHBONE SUSPENSION

FOUR LINK BEAM AXLE WITH A-ARM SUSPENSION

PUSH/PULL ROD DOUBLE WISHBONE T-CRANK ARB SUSP.

FORMULA 1 FRONT AND REAR SUSPENSION

ANY SUSPENSION OR MECHANISM TEMPLATE

ANALYSIS TYPES (CLICK HERE FOR INFO)

 VERTICAL MOTION

ROLL MOTION

STANDARD STEERING INPUT

CUSTOM STEERING INPUT 

LATERAL / CORNERING FORCE 

BRAKING FORCE 

TRACTION FORCE 

TYRE / TIRE ALIGNING TORQUE 

USER DEFINED ANALYSIS AND METRICS

SIMULATION FEATURES

USER DEFINED LAYOUT

LINEAR BUSHES / JOINTS

RIGID COMPONENTS

SPRING AND DAMPER MODEL

ANTI-ROLL BAR

NONLINEAR BUSHES / JOINTS

STATIC TOE ADJUSTMENT

STATIC CAMBER ADJUSTMENT

RIDE HEIGHT ADJUSTMENT

USER DEFINED MODEL

REPORTS / OUTPUT DATA

PDF

RAW CSV KPIS

RAW CSV KNC DATA

RAW CSV NONLINEAR BUSHES / JOINTS

USER DEFINED REPORTS AND OUTPUTS


STANDARD

STANDARD

STANDARD

STANDARD

STANDARD

STANDARD


ADVANCED (INCLUDES STANDARD)

ADVANCED (INCLUDES STANDARD)

ADVANCED (INCLUDES STANDARD)

ADVANCED (INCLUDES STANDARD)

ADVANCED (INCLUDES STANDARD)

ADVANCED (INCLUDES STANDARD)


CUSTOM (ANY MOVING MECHANISM)

CUSTOM (ANY MOVING MECHANISM)

CUSTOM (ANY MOVING MECHANISM)

READY FOR SELECTED USERS WITH F1 SPECIFIC TESTS

CUSTOM (ANY MOVING MECHANISM)

CUSTOM (ANY MOVING MECHANISM)

CUSTOM (ANY MOVING MECHANISM)

WordPress Pricing Table Plugin

—

To get a glimpse of the RACE Software reports download here a PDF Demo STANDARD Report – Double Wishbone Suspension and here a PDF Demo ADVANCED Report – Double Wishbone Suspension. Besides the PDF Reports users will get raw CSV data outputs for further analysis and results interpretation. All Software packages come with preloaded data and simulations for each suspension template.

RACE Software Guide – How to Easily Design with RACE Software

RACE Software - Constantly Evolving - Click here to check the Change Log / Updates

The RACE Software team, besides working on adding new features on current software packages will bring more plans such as PRO for suspension concept and fine tuning that will include quasi-static loads, stiffness matrix for flex components and compliantly mounted subframes.

Subscribe to our newsletter to be the first to know when they are available!

Under the CUSTOM package any user defined model, analysis, metrics, reports and simulations can be developed.

 

Contact us

VIEW ALL CARS FOR COMPARE

DOUBLE WISHBONE SUSPENSION TEMPLATES

STANDARD

ADVANCED

Powered by

MACPHERSON STRUT SUSPENSION TEMPLATES

STANDARD

ADVANCED

Powered by

FIVE LINK SUSPENSION TEMPLATES

STANDARD

ADVANCED

Powered by

CONTROL BLADE SUSPENSION TEMPLATES

STANDARD

ADVANCED

Powered by

PUSH/PULL ROD DOUBLE WISHBONE SUSPENSION TEMPLATES

STANDARD

ADVANCED

Powered by

FOUR LINK BEAM AXLE WITH A-ARM SUSPENSION TEMPLATES

STANDARD

ADVANCED

Powered by

PUSH/PULL ROD DOUBLE WISHBONE T-CRANK ANTI ROLL BAR SUSPENSION ADVANCED TEMPLATE

Powered by

FORMULA 1 CHASSIS ANALYSIS

THESE CAPABILITIES HAVE BEEN DEVELOPED WITH A TOP FORMULA 1 TEAM

THE TEMPLATES AND ASSOCIATED SPECIFIC TESTS ARE AVAILABLE

ENQUIRE NOW BY USING THE FORM BELOW OR BY WRITING TO US AT HI@RACE.SOFTWARE

Powered by

ANY SUSPENSION OR MECHANISM TEMPLATE

WE HAVE DEVELOPED CUSTOM SOLUTIONS FOR THE AUTOMOTIVE AND MOTORSPORT INDUSTRIES (AND ALSO FOR OTHER INDUSTRIES) FROM OEMS TO FORMULA 1 AND THE GAMING/SIMS INDUSTRY USING OUR LEAN, SCALABLE CLOUD-BASED MBS ARCHITECTURE.

WE CAN SIMULATE ANY MECHANISM FROM A SIMPLE DOOR HINGE TO A COMPLEX LANDING GEAR OF A PLANE.

ENQUIRE NOW BY USING THE FORM BELOW OR BY WRITING TO US AT HI@RACE.SOFTWARE

 

 

 

 

Powered by

RACE Software – Kinematics and Compliance (K&C) Tests

RACE Software Kinematics Tests
• Vertical Motion: ±50mm parallel wheel travel.
• Roll Motion: ±50mm opposite wheel travel. The test is run with the anti-roll bar connected (RACE
Advanced and RACE Pro only).
• Steering Input: ±50mm steering rack travel in RACE Standard. The steering rack travel is user defined
in RACE Advanced and RACE Pro.

RACE Software Compliance Tests
• Lateral Force: ±3000N lateral load applied at the tyre contact patch. The loads are applied in-phase
(load applied to left and right wheel in the same direction) and anti-phase (load applied to left and right
wheel in opposite directions). The tests are run with the load applied at the contact patch (0mm trail)
and with the load applied 30mm behind the contact patch (30mm trail). (Anti-phase tests are run in
RACE Pro only)
• Braking Force: ±3000N longitudinal load applied at the tyre contact patch. The test is run with the
load applied to both wheels and also with the load applied to the left wheel only. (Single wheel test is
run in RACE Pro only)
• Traction Force: ±3000N longitudinal load applied at the wheel centre. The test is run with the load
applied to both wheels and also with the load applied to the left wheel only. (Single wheel test is run in
RACE Pro only)
• Tyre Aligning Torque: ±300Nm torque applied at the tyre contact patch. The moments are applied
in-phase (moment applied to left and right wheel in the same direction) and anti-phase (moment applied
to left and right wheel in opposite directions). (Anti-phase test is run in RACE Pro only)

Powered by

Version 1.3.2 Released 13/07/2023
– Added static toe and camber adjustment capability to Advanced templates. A second hardpoint (P20) can now be defined on the wheel rotation axis. The wheel rotation axis is along a line joining P9 and P20. P20 must be outboard of P9. For a given P20 y coordinate, static toe is controlled by the x coordinate of P20 and static camber is controlled by the z coordinate of P20.
– Improved PDF report hyperlinks from the KPI graphs back to the KPI summary table.
– Fixed a bug with the ARB attachment to strut option on the MacPherson Strut Advanced template.
– Added additional demo PDF reports and CSV files for new users.

​Version 1.3.1 Released 18/06/2023
– Added ride height adjustment option to Advanced templates. This allows the user to move the suspension into bump or rebound to simulate a change in vehicle ride height before running the simulation. A positive ride height adjustment moves the suspension into bump, therefore simulating a lowered vehicle.
– Added spring installed length and spring installed load KPIs to the Static Geometry section in Advanced.
– Added additional CSV report outputs in Advanced. In addition to the existing KPI CSV report, two new reports contain the nonlinear joint curve data and the raw signals used to generate the PDF report KPI graphs. CSVs are now downloaded in a zip file containing the three csv files.
– Updated PDF report section 4 layout and text
– Added 3D pop-out option on all templates

Version 1.3.0 Released 23/02/2023
– Added 3D graphics for all templates
– Updated suspension hardpoint numbering images for all templates
– Added user simulation description to the cover page of the report and to section 3 of the report
– Added simulation ID to section 3 of the report
– Added a new search/filtering function on the previous simulations page. Pagination removed.
– Added anti-dive, anti-lift and anti-squat KPIs in degrees to the report
– Updated steering test description in section 2 of the report

Version 1.2.5 – Released 15/12/2022
– Added user input validation checks to Advanced suspension templates

Version 1.2.4 – Released 07/12/2022
– Added user defined steering rack travel to Advanced suspension templates with steering capability

Version 1.2.3 – Released 11/09/2022
– Released Beta version of RACE 3D graphics to the Double Wishbone Advanced Template. Known issues: x,y,z axes indicator arrows misaligned to global axes
– Fixed 3D bug: Bush original position graphics not cleared when a hardpoint is moved
– Fixed 3D bug: mouse hover over for ‘more information’ is not calibrated for all screen sizes

Version 1.2.2 – Released 07/09/2022
– Released Beta version of RACE 3D graphics to the Double Wishbone Standard Template. Known issues: Bush original position graphics not cleared when a hardpoint is moved, mouse hover over for ‘more information’ is not calibrated for all screen sizes, x,y,z axes indicator arrows misaligned to global axes

Version 1.2.1 – Released 02/09/2022
– Added new double wishbone images to the pdf report and suspension templates
– Updated the kingpin inclination and castor angle precision to one decimal place instead of two

Version 1.2.0 – Released 24/07/2022
– Added four link beam axle template with sliding A-Arm lateral control link, RACE advanced version
– Removed Beta tag from four link beam axle standard template

Version 1.1.0 – Released 15/07/2022
– Added four link beam axle template with sliding A-Arm lateral control link, RACE standard version, beta release

Version 1.0.0 – Released 30/05/2022
– First full release, Beta tag dropped
– Added user input error checking before simulations are submitted to the server
– Revised template layout. Minor updates to formatting. Stand alone topology section added

Beta Version 0.8.2 – Released 05/04/2022
– Added job queuing to manage parallel simulation requests

Beta Version 0.8.1 – Released 26/03/2022
– New simulation delete button added to the previous simulations page

Beta Version 0.8.0 – Released 21/11/2021
– First release of RACE Advanced Beta Version
– Added RACE Advanced templates for Double Wishbone, MacPherson Strut, 5 Link, Control Blade, Push/Pull Rod Double Wishbone
– New roll (opposite wheel travel) test included in Advanced analysis
– Support for nonlinear bushes and anti-roll bars added in Advanced templates
– Support for two anti-roll bar configurations in push/pull rod double wishbone suspensions (Conventional and T-Crank systems)

Beta Version 0.7.3 – Released 09/10/2021
– First release of RACE Advanced Alpha version for internal testing

Beta Version 0.7.2 – Released 20/07/2021
– Updated csv report filename to match the pdf report filname

Beta Version 0.7.1 – Released 06/06/2021
– Added a full user input export as a csv file for internal RACE development

Beta Version 0.7.0 – Released 07/05/2021
– Updated steer axis calculation method to use the instantaneous knuckle rotation to calculate steering axis geometry KPIs, thisensures robust steer axis calculation for suspensions with a virtual steer axis
– Added the option of including an ideal ball joint (infinitely stiff) in suspension templates
– Added code to include the link stiffness as an input in the suspension templates (this is to support future developments on RACE Advanced and Pro levels)

Beta Version 0.6.2 – Released 01/05/2021
– Revised code to extract the username from the backend database and to write it to the pdf report

Beta Version 0.6.1 – Released 19/04/2021
– Updated all existing templates to use the new standard base MBS template

Beta Version 0.6.0 – Released 05/04/2021
– Revised all MBS suspension templates to use a standard base template, no impact to the user analysis or results

Beta Version 0.5.4 – Released 17/03/2021
– Updates to the MBS simulation code, no impact on the user analysis or results

Beta Version 0.5.3 – Released 07/02/2021
– Added customer RACE Custom suspension template

Beta Version 0.5.2 – Released 30/01/2021
– Implemented an error report which is generated if 4 or more simulations fail
– Revised kingpin axis marker naming for kingpin unit vector calculation
– Added KPI table csv format as a download option on the previous simulations page

Beta Version 0.5.1 – Released 03/01/2021
– Revised RACE Custom report format

Beta Version 0.5.0 – Released 31/12/2020
– Revised input units in all templates to mm and N
– First customer RACE Custom simulation and analysis implemented

Beta Version 0.4.0 – Released 23/12/2020
– Updated RACE source code to enable RACE Custom simulations and reports
– First release of RACE Custom

Beta Version 0.3.5 – Released 07/12/2020
– Revised the spring element code in the MBS simulations

Beta Version 0.3.4 – Released 03/12/2020
– Added torsion bar option to the push/pull rod template
– Updated suspension pictures for the MacPherson and Control blade templates

Beta Version 0.3.3 – Released 10/11/2020
– First release of the double wishbone push/pull rod template
– Updated report with minor formatting changes

Beta Version 0.3.2 – Released 07/11/2020
– First release of the control blade template
– Added spring user configurable attachment options
– Updated all templates to accept spring hardpoints
– Revised joints table format in the report
– Revised bush options in all templates

Beta Version 0.3.1 – Released 07/10/2020
– Added suspension images to the pdf report

Beta Version 0.3.0 – Released 05/10/2020
– First release of the MacPherson strut template
– First release of the 5 link template
– Added suspension type to the RACE report front cover

Beta Version 0.2.7 – Released 15/08/2020
– Fixed a report bug caused by underscores in the usernames
– Revised plot axis scaling for various KPI plots
– Fixed bug in the pdf report document title read by pdf readers

Beta Version 0.2.6 – Released 18/07/2020
– Added user configurable damper attachment options
– Updated report to display the damper attachment selected by the user

Beta Version 0.2.5 – Released 21/06/2020
– Added clean up code to delete all unnecessary analysis files after a simulation is complete

Beta Version 0.2.4 – Released 31/05/2020
– Updated hardpoint precision to 3 decimal places
– Implemented 300 second maximum wait time for simulations to finish

Beta Version 0.2.3 – Released 25/04/2020
– Added more robust checking to determine when MBS simulations are complete
– Added MBS simulation CPU time as an output in the RACE pdf report
– Updated pdf report KPI metric precision

Beta Version 0.2.2 – Released 13/04/2020
– Updated to the new RACE logo on the pdf reports
– Spring rate, spring preload, tyre loaded radius and wheel base now read from user inputs
– Improved report format with reordered KPI table

Beta Version 0.2.1 – Released 12/04/2020
– Added simulation status user feedback to the previous simulation page

Beta Version 0.2.0 – Released 01/04/2020
– First release of RACE Software Beta version

Alpha Version 0.1.0 – Released 15/07/2019
– First release of RACE Software Alpha Version

Powered by