Spring / Damper Ratio – Suspension KPI

Spring ratio/Damper ratio is a ratio between the displacement of the spring/damper and the vertical displacement of the wheel centre.

As the spring and dampers on a suspension system are mounted inboard of the wheel centre, the spring/damper ratio on production cars is almost always less than 1 (i.e. the damper or spring displacement is less than the wheel centre displacement). On race cars using push or pull rod suspension systems, ratios greater than 1 are possible.

The ratio is governed by the position of the spring/damper relative to the wheel centre and also by the inclination of the spring/damper. It is generally desirable to have a spring or damper ratio greater than ~0.7. From the damper perspective, this ensures that for any wheel centre displacement, there is a reasonable amount of damper displacement to allow the damper to generate force and influence the motion of the suspension. It is less critical from a spring point of view, but a higher ratio allows a softer spring to be used to deliver the target wheel rate.  Lower damper and spring ratios do result in less damper or spring travel for a given amount of suspension wheel travel, this may be a consideration in some suspension designs.

Spring and damper ratios are not constant and change with suspension travel.

—

ENHANCE YOUR CHASSIS AND SUSPENSION SYSTEMS EXPERTISE WITH CUTTING-EDGE SOFTWARE SOLUTIONS AND SUSPENSION COURSES

AUTOMOTIVE/MOTORSPORT SUSPENSION AND CHASSIS SYSTEMS – DESIGN AND ENGINEERING FUNDAMENTALS COURSE

SUSPENSION PERFORMANCE TUNING USING MULTIBODY SIMULATION SOFTWARE COURSE

START USING RACE SOFTWARE TODAY WITH A FREE TRIAL ON ALL PLANS